*#1 :/E
Owner’s Manual
6
1
CHANGE THE REGISTRATION OF EACH PART
SELECT THE PART TO CONTROL
Touch the [DRAWBAR] button 3 or 4 times and select
the parts to control the Registration. Every time you
touch the button, the selected one of the 3 lights (UP-
PER, LOWER, PEDAL) goes on. There is no effect
(NIL=invalid) when you touch the button one more time.
CONTROL THE DRAWBARS
2
The Registration of the UPPER and LOWER parts is
controlled by all the 9 Drawbars, and the PEDAL part
by 16' and 8' Drawbars.
Only the length (footage) of the pulled-out Drawbars
change in the Registration. The footage of the one not
pulled-out now does not change (remains as already set).
MATCH THE REGISTRATION TO DRAWBARS
Touch the [DRAWBAR] button 3 or 4 times and select the part
you want to match the Registration to the Drawbars.
Hold down the button for a few seconds until the light blinks.
Release it after the light is ON. Now the current physical Draw-
bar setting matches the actual Registration.
OPERATION
DRAWBAR REGISTRATION
Touch and hold