background image

*#1 :/E

Owner’s Manual

10

PRESET

Each Preset button is used for recalling one of the 5 Patches. This button is also used to
records the setting to the Patch you selected.

RECALL THE PATCH VIA PRESET BUTTON

Each Patch registered to the Preset buttons [1], [2], [3] is recalled by
touching each button individually. To recall the Patches registered to
the Presets 4 and 5, touch the Preset buttons [1] and [2]. [2] and [3] at
the same time, respectively.

ASSIGNING THE PATCH NUMBERS TO PRESET BUTTONS

To assign a Patch number you want to recall to a Preset button, first
call out the Patch you want on the XM-2 and touch the Preset button
you want to assign it to on this unit. Holding down the [RECORD]
button on the XM-2 at the same time.  “

Recording Preset...

is displayed on the XM-2 for a few seconds and the Preset-button
light blinks on this unit for a short period of time.

RECORDING THE CURRENT SETTINGS TO PRESET BUTTONS

To record the present setting to a Preset button, hold down the Preset
button until the light blinks, and then release it. The present settings
are recorded to the Patches assigned to the Preset buttons.

Recording Patch...

” is displayed on the XM-2 for a few sec-

onds.

Touch

Touch and hold

Touch

Touch and hold

Summary of Contents for XMc-2













Reviews: