5
Introduction
Ë
Basic Controls
The panel controls on the
SKX
include Drawbars, Rotary Controls, Touch Tabs and Touch Buttons. These controls
allow you to make adjustments and changes on the instrument.
ON / OFF Power Switch
The ON / OFF Power Switch is located at the rear of the instrument on the left side of the
Accessory Panel (the right side if you’re in front of the keyboard(s). When this switch is in the
"ON" (pushed in at the top) position, the Information Center Display as well as some LED's
(
L
ight
E
mitting
D
iodes) will light up showing that the instrument is "ON".
MASTER VOLUME Rotary Control
The
MASTER VOLUME Rotary Control
is located on the extreme left of the Control Panel.
With this Rotary Control, you can control the total or maximum volume of the entire instrument.
Turn this control to the right to increase the total volume, and to the left to decrease the total volume.
NOTE:
If you have an Expression Pedal connected, it will express up to the amount
determined by the setting of the MASTER VOLUME Rotary Control.
Information Center Display
The Information Center Display is located on the left side of the Control Panel.
The Information Center Display has two modes: (1) the PLAY mode and (2) the MENU MODE. The PLAY Mode
allows you to graphically see Drawbar settings, Extra Voice settings, Patch Numbers and Patch Names. The MENU
Mode allows you to change and edit the
SKX
's software parameters such as Drawbar Voicing, MIDI parameters and
other advanced functions.
NOTE:
The PLAY and MENU Modes are covered in the Information Center Display section of this Guide.
Summary of Contents for SKX
Page 1: ...INTRODUCTION...
Page 2: ......