Special Performance Features
12
CALIBRATE (POLARITY)
Some Foot Switches, such as the Hammond FS-9H, are “+” or “positive” (make contact when pressed)
while others are “-“ or “negative” (break contact when pressed). The CALIBRATE Parameter allows you to
calibrate the polarity of a Foot Switch so that it will function correctly with the SK PRO.
To calibrate a Foot Switch for the SK PRO, do the following:
NOTE:
Do not press the Foot Switch while performing this operation.
1.
From any of the FOOT SWITCH 1 or FOOT SWITCH 2 screens, press the DIRECTION “
q
”
button repeatedly until the box, “CALIBRATE” is highlighted:
2.
Press the ENTER button. You will see the following message in the display for approximately
½ second:
After the above message disappears, the connected Foot Switch is set to work properly with
the SK PRO.
