XB2 Kit Installation
2
Disconnect the keyboard connector from the motherboard
and remove the keyboard.
The keyboard is attached with 7 medium-sized screws
(M4) on the bottom and inside.
Make sure that no screw gets lost and
remember which
screw goes where.
The interface board on the rear panel is no longer required
and can be removed. Disconnect all plug connections and
remove the board.
Disassemble the MIDI connector board and put it aside.
This board will be reinstalled later
.
Remove the circuit board with the 6.3mm jacks, the
potentiometers and the jack for the expression pedal.
The socket for the expression pedal may be attached with
plastic rivets. Pinch these off on the inside with the side
cutter.