16
17
Note: The oscillating attachment is suitable for
cutting wood or plasterboard but not for cutting
stone or concrete walls.
1. Select the desired angle for the application.
2. Position the holes of the oscillating accessory
over the fixing pins of the mounting plate.
3. Make sure that the accessory lies flat on the
surface of the mounting plate.
4. Place the washer in the inner opening of the
oscillation accessory.
Note: Make sure that the flat side of the washer
that holds the oscillating accessory faces the
accessory.
5. Insert the fastening screw through the washer
into the rotary spindle of the oscillating
attachment.
6. Use the Allen key to tighten the fastening screw
by turning it clockwise. Do not overtighten
A. Sanding
The Delta sanding plate is fitted with Velcro fabric
for quick attachment of the sanding sheets.
Clean the sanding plate before attaching the
sanding sheet.
1. Attaching the sanding sheet: Press the sanding
sheet evenly onto the sanding plate. Make sure
that the punched holes in the sanding sheet
match up with the holes in the sanding plate.
2. Removing the sanding sheet: Simply pull the
sanding sheet off the sanding plate.
Note: Always wear suitable clothing and
protective equipment when working with the
device. Ensure that the device works correctly
before every use. Personal protective
equipment and a correctly functioning device
reduce the risk of injuries and accidents.
After switching on, move the device so that it
comes into contact with the workpiece. In order to
achieve optimal sanding results, only ever work
with sanding sheets that are in perfect condition.
Apply light and even pressure while working. This
protects the device and sanding sheet. Do not use
the same sanding sheet to sand different materials
(e.g. metal and then wood).
Selection of the sanding sheet
(95 mm x 95 mm x 95 mm)
P60 for rough sanding
P120 for finishing
P240 for fine sanding
B. Sawing with the oscillating saw blade
Always wear eye protection. Use only undamaged
saw blades that are in full working order. Make sure
that you have a secure footing and hold the device
firmly with both hands at a sufficient distance from
your body. Before you saw the workpiece, first check
that no foreign objects such as nails and screws are
present. These must be removed before starting
work. It is only intended for cutting soft materials,
such as wood or plasterboard.
THE OSCILLATING SAW IS NOT SUITABLE FOR
CUTTING INTO STONE OR CONCRETE WALLS.
C. Scraping with the oscillating scraper
Old carpet adhesive and wallpaper residues can be
removed smoothly with the help of the oscillating
scraper. Always work at the correct angle, so as not
to damage the carrier material.
This symbol means that such electrical
equipment or batteries must not be
disposed of with normal household
waste. You are legally obliged to hand in such items -
free of charge - to a public collection point or distributor-
created collection point for the recycling of electrical
devices and expired bulbs and batteries within the scope
of the Electrical and Electronic Equipment Act that are
not encapsulated by or fixed into the appliance, and can
be removed or separated from the appliance non-
destructively, for disposal at the end of their service life.
Use rechargeable batteries instead of single-use
batteries wherever possible. The recovery and recycling
of old appliances makes an important contribution to
protecting our environment. Improper disposal can
result in toxic substances being released into the
environment, which can have harmful effects upon
people, animals and plants. Batteries with an increased
pollutant content are also marked with the following
symbols: Cd = cadmium, Hg = mercury, Pb = lead.
Consumers are themselves responsible for deleting any
personal data from appliances.
This product complies with the European
directives.
Protection rating II
SPECIFICATIONS:
The product must be stored in a dry place and must
not be exposed to direct sunlight during transport.
Operating temperatures and humidity: 10 - 35°C ≤
65% relative humidity
Temperature and humidity for storing the tool:
M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 17
M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 17
20.07.22 12:21
20.07.22 12:21