14
4V LITHIUM RECHARGEABLE SCREWDRIVER
5. Magnetic Insert Bit Holder
The magnetic insert bit holder
functions to extend the bit in tight
places. It is compatible with 6.35mm
shanks.
a. To install the magnetic insert bit
holder, push it into the collet until
it is firmly in place.
b. Insert a 6.35mm bit into the bit
holder. The magnetic bit holder
holds the head of the bit against
the shaft.
c. To remove the magnetic bit holder,
pull it straight from the collet.
!
WARNING
CAUTION:
To avoid possibly serious injury, take care not to activate the forward/
reverse selector when installing or removing bits.
6. To Use The Universal Magnetic
Collar
Insert a 88,9mm impact bit into the
wider(non-magnetic) end of the collar
and push it firmly until the tip of the
bit is exposed
7. Screw Driving
a. Install a suitable bit.
NOTICE:
Always use the correct
type and size of screwdriver bit for
your fastener.
b. Grasp only the handle of the
tool only and align the bit
perpendicular to the screw.
c. Apply just enough pressure to
keep the bit engaged on the
screw.
d. To tighten a screw, rotate
the forward/reverse selector
clockwise.
e. To loosen a screw, rotate the
5
MAGNETIC INSERT
BIT HOLDER
6
UNIVERSAL
MAGNETIC
COLLAR
7
