12
20V 7/8" RECIPROCATING SAW
OPERATING INSTRUCTIONS
4. Attaching and detaching the battery pack
WARNING:
To reduce the risk of fire, personal injury, and product damage due to a
short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to
flow inside them.
Corrosive or conductive fluids, such as seawater, certain industrial chemicals,
and bleach or bleach-containing products, etc., can cause a short circuit.
WARNING:
If any parts are damaged or missing, do not operate this product
until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not
recommended for use with this tool.
Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible serious injury.
WARNING:
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling parts. This
cordless reciprocating saw must be used only with the battery packs and charger
listed below:
BATTERY PACK
CHARGER
1.5Ah
2.0Ah
4.0 Ah
13W
40W
Hammerhead
HCBT015
Hammerhead
HCBT020
Hammerhead
HCBT040
Hammerhead
HCCG013
Hammerhead
HCCG040
To attach the battery pack:
Align the raised rib on the battery pack with
the grooves in the tool, and then slide the
battery pack onto the tool.
NOTICE:
When placing the battery pack
on the tool, be sure that the raised rib on
the battery pack aligns with the groove
in the tool and that the latches snap into
place properly. Improper attachment of the
battery pack can cause damage to internal
components.
To detach the battery pack:
Depress the battery-release button, located
on the front of the battery pack, to release the battery pack. Pull the battery pack out and
remove it from the tool.
4
Battery
relesae button
Detach
Attach
