Hammerhead HCID120, Manual

Page: 11 / 60

COMPaCT IMPaCT DrIVEr/aUTO HaMMEr 11
OPERATInG InsTRUCTIOns
2. Variable-speed Trigger
a. To turn the tool ON, depress the
variable-speed trigger.
b. To turn it Off, release the
variable-speed trigger.
nOTICE: The variable-speed trigger
delivers higher speed with increased
trigger pressure and lower speed with
decreased trigger pressure.
3. forward/lock/Reverse selector
The direction of rotation while impact
driving is reversible and is controlled
by a selector located above the
variable-speed trigger. With the tool
held toward you as shown in figure 3.
a. Position the forward/lock/reverse
selector to the right of the tool for
forward rotation.
b. Position the forward/lock/reverse
selector to the left of the tool for
reverse rotation.
c. setting the forward/lock/reverse
selector in the Off (center-lock) position helps reduce the possibility of accidental
starting when not in use.
nOTICE: To prevent gear damage, always allow the tool to come to a complete stop before
changing the direction of rotation.
nOTICE: The tool will not run unless the forward/lock/reverse selector is engaged to the left
or right.
3
REVERsE fORWARD
2
VARIAblE-
sPEED
TRIGGER