Hammer HS 950, User Manual

Page: 46 / 60

46
Edge sanders
HS 950
Faults
11 Faults
11.1 Safety instructions
Warning! Risk of injury!: Repairing faults incorrectly can result in personal injury or damage to the machine.
For this reason, this work may only be carried out by authorised, trained personnel who are familiar with
how to operate the machine and in strict observance of all safety instructions.
Warning! Danger! Electric current!: Work on electrical fittings may only be carried out by qualified personnel
and in strict observance of the safety instructions.
11.2 What to do if a fault develops
In most cases:
•
In the event of a breakdown which creates danger for
either personnel or equipment, the machine should
be stopped immediately by activating the emergency
stop.
•
Also disconnect the machine from the mains and
ensure it can not be switched on again.
• Inform those responsible for machine faults
immediately.
• Type and extent of fault should be determined by an
authorised professional, as well as the cause and
repair.
11.3 What to do after rectifying the fault
Before switching the machine back on:
• The fault and its cause are professionally repaired.
• All safety equipment has been assembled according
to regulations and is working correctly.
• Individuals are not located within the danger area of
the machine.
Warning! Risk of injury!