52
Adjustments and tool changes
Protective equipment:
●
Protective gloves
Tool:
●
Spanner 22 mm
●
Collet chuck key
1.
Clean the collet chuck, sleeve nut and mounting.
2.
Insert the collet chuck into the sleeve nut.
3.
Insert the router tool and move it until it reaches the stop in the tool socket.
4.
Tighten the HF spindle with a spanner.
5.
Tighten the locking nut and check that the router tool is inserted correctly.
8.2
Adjust the extraction hood
1
Fig. 35: Adjust the extraction hood
1 Height adjustment screw
Adjust the extraction hood
1.
Release height adjustment screw.
2.
Set the extraction hood in such way, that the dust brush is positioned several
millimetres above the tool.
3.
Tighten height adjustment screw.
8.2.1
Adjust the perform extraction hood
The perform extraction hood can be set to a fixed height, or can move together
with the working head.
Summary of Contents for HNC3 825
Page 78: ...78 Disposal...
Page 79: ......