Hammer FR 15, Instruction Manual

Page: 12 / 24

ASSEMBLY AND DISASSEMBLY OF THE ATTACHMENT
CAUTION: While being assembled, the attachment must be placed securely on the ground with the
excavator’s engine at a standstill and parking brakes engaged.
If our attachment is supplied without attachment couplings, the client is responsible for fitting it
with appropriate couplings complying with current safety standards.
The installer, operator, and maintenance personnel must wear the appropriate safety devices specified by the
safety regulations in effect in the country where the equipment is used.
HAMMER SRL
denies any liability in the event of accidents if the installer, operator, and maintenance
personnel fail to use the appropriate safety devices.
Assembly:
The couplings provided on our attachment are equivalent to those supplied for the standard buckets of the
vehicle on which this attachment is mounted. For a detailed explanation on the means of mechanical
connection please refer to the instruction manual of the vehicle in question.
The hydraulic system is connected by attaching the two hydraulic attachments provided on the equipment to
the corresponding attachments on the machine.
This operation is carried out for the attachments of the equipment rotating system as well as for those of the
opening and closing system.
ATTENTION:
THE ROTATION SYSTEM must be connected to ONE DELIVERY AND TO ITS RESPECTIVE RETURN.
THE OPENING/CLOSING SYSTEM must be connected to ONE DELIVERY AND TO ITS RESPECTIVE RETURN.
KEEP THE TWO SYSTEMS CAREFULLY SEPARATED.
CAUTION: THE OUTLET PRESSURE OF THE EXCAVATOR MUST ALWAYS BE AS REQUIRED FOR THE
ATTACHMENT IN USE.
DO NOT USE THE ATTACHMENT WITHOUT FIRST CHECKING THAT THE DELIVERY PRESSURE OF
THE ATTACHMENT IS AS REQUIRED.
Disassembly:
When disassembling, the attachment must be placed securely on the ground.
a) Turn off the excavator engine and engage the parking brakes
b)
Ensure that the hydraulic system connected to the attachment is no longer under pressure
c) Remove hydraulic connections between the excavator and attachment
d) Uncouple the coupling pins of the attachment as described in the excavator instruction manual.
START-UP AND USE OF THE ATTACHMENT
During work the operator must stay on the excavator in the position recommended by the manufacturer.
No one may park within 30 meters of the excavator when it is working.
The various attachments are coupled with the operator in his working position on the excavator and no one
may park within 30 meters of the attachment coupling position.
12