Hammer Strength HDU-ADAT, Owner'S Manual & Assembly Instructions, Page: 51 / 58

Insert Inspection
Inspect insert within the strain-relief cable end assembly and replace if any sign of damage.
1.
Check around plastic insert and the plastic housing for any excessive wear or damage.
Item Description Qty.
1 Plastic Insert 1
2 Plastic Housing 1
2. Replace plastic insert if cracked, torn, separated, overly worn or damaged in any way.
Item Description Status
1 Insert - No damage Use
2 Insert - Cracked Replace
3 Insert - Separated Replace
3. Using a 4mm hex wrench, remove screws from the housing/link and the damaged insert from cable assembly.
Replace damaged insert, reassemble components and
tighten to 25-30 in-lbs (33-40 Nm).
Item Description Qty.
1 Cable Assembly 1
2 Housing 1
3 Screw; M5 X 0.8 HXS SOC 2
4 Insert 1
5 Link 1
Page 49 of 55