Hammer Strength HDU-ADAT, Owner'S Manual & Assembly Instructions, Page: 23 / 58

HDU-DPR Assembly
1. With the unit in place, attach the foot slippers to the bench and tower assemblies.
Item Description Qty.
1 Bench Assembly 1
2 Bench Slipper 2
3 Tower Assembly 1
4 Foot Slipper 2
2. With the rectangle tubing nuts in the tower assembly, attach bench assembly to the tower assembly and tighten to
45-50 ft-lbs (61.0-67.8 nm) .
Item Description Qty.
1 Bench Assembly 1
2 Screw, 1/2-13 X .1.25 3
3 1/2 in Star Washer 3
4 Rectangle Tubing Nut, 11GA, 3" 3
5 Tower Assembly 1
3. Follow Weight Stack Assembly instructions.
4. Route the row cable and 4-1/2 inch pulley through the floating pulley assembly and tighten hardware to 20-25
ft-lbs (27.1-33.8 nm)
.
Item Description Qty.
1 Nut, Nylock M10 X 1.5 SS 1
2 3/8 Flat Washer 2
3 Floating Pulley Assembly 1
4 Screw, M10 X 1.5 50mm 1
5 Row Cable 1
6 4-1/2 Inch Pulley 1
Page 21 of 55