Hammer Strength ELT-HR, Owner'S Manual, Page: 27 / 78

2. Install bolts, washers, and rectangle tubing nuts securing upper PR crossmember to tops of training uprights using
a 3/4" wrench.
IMPORTANT: Upper PR crossmembers only have holes in the sides.
Item Description Qty.
1 Upper PR Crossmember 1
2 Bolt, 1/2"-13 x 1.25" 4
3 Lock Washer, 1/2" 4
4 Rectangle Tubing Nut, 7GA, 3" 4
5 Rectangle Tubing Nut, 7GA, 4" 4
Hand tighten hardware.
3.
Install bolts, backing washers, washers, lock nut, and rectangle tubing nuts securing lower PR crossmember to
bottoms of training uprights using a 3/4" wrench.
IMPORTANT: Lower PR crossmembers have holes in all four sides.
Item Description Qty.
1 Lower PR Crossmember 1
2 Bolt, 1/2"-13 x 1.25" 3
3 Bolt, 1/2" x 5 1/2" 1
4 Backing Washer 2
5 Lock Washer, 1/2" 3
6 Lock Nut, 1/2" 1
7 Rectangle Tubing Nut, 7GA, 3" 3
Hand tighten hardware.
Page 25 of 75