Hammer Strength ELT-HR, Owner'S Manual, Page: 18 / 78

4. Install bolts, washers, lock nut, and rectangle tubing nut securing stability foot to training upright using two 3/4"
wrenches.
Item Description Qty.
1 Stability Foot 1
2 Bolt, 1/2"-13 x 1.25" 1
3 Bolt, 1/2" x 5 1/2" 1
4 Lock Washer, 1/2" 3
5 Lock Nut, 1/2" 1
6 Rectangle Tubing Nut, 7GA, 3" 1
Hand tighten hardware.
NOTE: Stability feet are designed to lift the training uprights slightly off the floor. This is done to ensure solid
contact to the floor at the furthest outside points.
5.
Repeat Steps 1-4 to assemble the opposite uprights and crossmembers.
Page 16 of 75