9
You can copy a VHS tape to a DVD only if the VHS tape is not copy-‐protected material. “Copy-‐once only”
video can only be recorded to CPRM compatible DVD-‐RW formatted in VR mode.
Prior to recording, note your recording time, listed on your DVD. The following chart shows recording times,
but is only an estimate and should only be used for reference. Actual recording times will be on the DVD
packaging or on the front of the DVD.
Recording
Mode
Recording
Time
Video/Sound Quality
XP
60 Min
SP
120 Min
LP
240 Min
EP
360 Min
SLP
480 Min
1. Press [SETUP] and use
to select “General Settings.” Press
[ENTER].
2. Use
to select “Recording.” Press [ENTER].
3. Use
to select “Dubbing Mode.” Press [ENTER].
4. Use
to select “VCR
→DVD.” Press [ENTER].
5. Press [SETUP] to exit.
6. Press [VCR].
7. Press
. Then Press
at the point you wish to start
recording.
8. Press [DVD], then press [REC MODE] repeatedly to select the desired
recording mode (see chart above or DVD case for available recording
modes.
9. Press [DUBBING]. VCR to DVD duplication starts. Dubbing indicator will
appear on the front panel display during dubbing.
10. Press
to stop the recording. Title list will automatically
appear.
VHS to DVD Dubbing
Since it takes a few seconds before the actual dubbing begins, please
allow an extra 5 seconds when selecting the starting point.
If you want to watch the duplicated material after the VCR to DVD
duplication, press [TOP MENU] first then press [ENTER] twice.
-‐This unit will automatically stop
duplication if no image is available
on playback for more than 3 min.
-‐Picture may be distorted due to
the auto tracking function.
Playback the VHS tape until the
picture is stabilized and then set
the starting point where you wish
to start recording. Start dubbing.
An error message will appear on screen if copy-‐protected material
is detected.
