5
3.
Install the hard drives and replace the front panel, then turn on
the power.
4.
Format the drives.
Note:
Changing the RAID mode will require you to re-format the
drivers. Make sure to backup all existing data first.
Normal Mode (Non-Raid)
Normal mode is the default setting of HDD enclosure and will not
use any RAID mode. In Normal condition, both of the two hard disk
mode inside the enclosure are in independent operation state, and
also will be identified as the two separate hearts in the system,
users can choose any hard drive for storing files. If one piece of
hard disk is damaged, the other piece of hard disk data would not
be influenced.