11
Replacing Hard Drives
When one drive fails, the HDD LED will display below state:
1.
If HDD1 Fails: Every 3 seconds LED flash once when power
on.
2.
If HDD2 Fails: LED off.
If one drive fails and the RAID mode is set to RAID0 or JBOD, the
data will be lost and the system can not be accessed again until the
drive have been replaced.
1.
Check the HDD LED state and replace the faulty drive. The
power must turn off when replacing the drive.
2.
For RAID 0 and JBOD, restart the system and then format the
drives again.
3.
For Non-RAID (Normal Mode), simply format the new drive.
