ADSL2+ Ethernet Modem
HRDSL524
8
3. Hardware Requirements
To use ADSL2+ Ethernet Modem, please have following hardware / accessories ready.
•
A PC with pre-installed Ethernet Adapter (Required)
•
12V power adaptor (Included in the package)
•
RJ-45 Ethernet cable (Included in the package)
•
RJ-11cable (Included in the package)
3.1 Setting up the Hardware Environment
Note!
Be sure that you are well insulated from any power source to avoid electricity shock.
Please kindly refer to chapter 4.0 “Installation & Setup”
3.2 Powering on ADSL2+ Ethernet Modem
1. Connect the power to the ADSL2+ Ethernet Modem by plugging the power supply into
an appropriate electrical outlet.
2. If the Power LED is off, refer to “Troubleshooting” for information.
Note!
Use only the manufacturer-approved power supply that shipped with the ADSL2+
Ethernet Modem.
Please kindly refer to chapter 4.0 “Installation & Setup”