Warning:
. Do not perform disk operations (format, partition and chkdsk) when
multiple computers are connected.
. NetDisk can be formatted, partitioned, chkdsk only when one computer
is connected.
. When sharing NetDisk between Windows 2000 and Windows XP, per
form chkdsk, if data corrupt occurs, NetDisk function will be restored.
However, corrupted data will be lost. Therefore, do not force to take over
and mount Read/Write access before other computers are unmounted
the write access permission.
Software Installation for Mac
USB2.0 Mode in Mac
When the enclosure is connected to the computer USB port using included
USB cable, Mac OS will recognize it automatically and mount the drive to
desktop. If the hard drive is not initialized yet, please refer to section “IDE
Hard Drive Partition and Format” for instruction.
Using Network Mode in Mac
Note: Current NDAS driver for Mac Supports only PowerPC – based Mac.
Please check availability of NDAS driver for Intel-based Mac in our website.
A) Driver Installation
1. Insert included CD.
2. Select to open the OS folder to match your operating system.
3. Run “NDAS Install.mpkg” file.
4. Follow through the installer window to complete driver installation.
5. Restart computer.
B) Drive Registration and Mount the NetDisk Drive
1. Power on and use included Ethernet cable to plug NetDisk enclosure into
available Ethernet port on the Router, switch or Wireless Access Point in
you Local Area Network (LAN).
2. Open “NDAS Utility” from Go > Utilities (or Application > Utilities).
14
