Hamlet Hero Deluxe Multifuel Stove
15
INSTALLATION
FIREBOX LINER PANELS
The Hero Deluxe Multifuel stoves use reflective
liners to the sides and back. The throat plate sits on
top of the side and rear panels. These should come
fitted to your fire, if however they are not proceed
as follows to fit them.
•With the grate in place
•Insert the side liner panels
•Set the small liners into the back of the fire resting
onto the ledge behind the grate.
•Fit the throat plate with the single bend and two
cut outs to the front facing up. The projecting lugs
sit on top of the side liners. The long centre tab on
the back edge rests on the rear liners. The shorter
turn-down tabs against the vertical face.
Note: Neither the rear firebox liners nor the side
firebox liners are "handed", both faces are
suitable for direct contact with the fire.
Note: Cracking of lining panels does not effect
efficiency.
Fig. 10
Hero Deluxe liners and throat plate.
Fig. 11
Liners inserted in Hero Deluxe stove.
Fig. 12
Inserting Throat Plate in to the
Hero Deluxe stove.
Fig. 13
Liners, throat plate and grate in
Hero Deluxe stove.
REMOVAL OF THE THROAT PLATE
Blocked chimneys cause dangerous fumes to
escape. Remove throat plate at least monthly to
clean. Keep chimney and flue ways clear.
