© HAMILTON 2006 / KHAKI AUTOMATIC FROGMAN
Features
A)
Crown protector
B)
Start-Stop button
C)
Reset-to-zero button
D)
Crown protector
E)
Crown for adjustment of time and date
1)
60-second counter
2)
30-minute counter
3)
12-hour counter
4)
Date
Adjustingthetime
1.
Unscrew the crown protector
(D)
.
2.
Pull out the crown
(E)
fully to position
(p2)
.
3.
Adjust the time by turning the
crown in the desired direction.
4.
Push the crown fully back in and screw
down the crown protector
(D)
.
Adjustingthedate
1.
Unscrew the crown protector
(D)
.
2.
Pull out the crown
(E)
to the
intermediate position
(p1)
.
3.
Turn the crown clockwise until the desired date
is displayed. Avoid performing this operation
between 8 p.m. and 2 a.m. (2000 and 0200).
4.
Push the crown fully back in and screw
down the crown protector
(D)
.
Measuringasingletimewiththe
Start-Stopfunction
1.
Unscrew the crown protector
(A)
to
access the chronograph buttons.
2.
Press button
(B)
: the chronograph starts.
3.
Press button
(B)
: the chronograph stops.
4.
Press button
(C)
: reset to zero.
5.
After use, make sure to screw down
the crown protector
(A)
.
NB:
before starting a time measurement, the hands
should be reset to zero. If necessary, push button
(C)
.
Addfunction
For measuring successive times
(each time is added to the previous total).
1.
Unscrew the crown protector
(A)
to
access the chronograph buttons.
2.
Press button
(B)
: the chronograph starts.
3.
Press button
(B)
again: the chronograph stops.
4.
Repeat steps 2 and 3 for as many time
measurements as desired. At the end of
the final step, the chronograph displays the
total time, i.e. the cumulated time of all the
measurements. Press button
(C)
to reset to zero.
5.
After use, make sure to screw down
the crown protector
(A)
.
