.
SAFETY
WARNING:
FAILURE TO FOLLOW THE SAFETY PRECAUTIONS BELOW MAY RESULT IN A FIRE CAUSING PROPERTY DAMAGE, PERSONAL
INJURY, OR LOSS OF LIFE
WARNING
Run system only at US standard 120 volt.
Do not place objects on top of this product.
Do not hang unit by power or lamp cord.
Do not use an ungrounded 2 prong outlet or timer.
Ventilating fan must be running when any light is in operation.
Do not plug or unplug the system lamp cords while ballasts are running.
Turn off and unplug Light System before touching Aquarium or Light System.
Shut off the power (electricity) prior to bulb replacement, and maintenance to avoid injury.
This is not a water or moisture proof system. Water or moisture should not come in contact with any part of the system.
A glass or acrylic lens is required to cover the entire top of the aquarium to avoid moisture evaporation or water contact with lighting system.
Do not place electrical items (power outlets, timers, ballasts, electrical cord connections, etc.) behind or under the aquarium.
Avoid accidental water spillage or splash on electrical items, place on a dry, protected shelf away from water splash.
All plug connections must be tight, do not leave gaps between the cord connections.
Do not use this system if any part has been in contact with water (even if still operational), electrical contacts may become corroded by water exposure.
Unit operates at high temperatures. Lamps get very hot, allow unit to cool before touching and keep children and pets away from system.
Never modify, alter or rewire this system. Doing so creates a potentially hazardous situation and voids the manufacturer’s warranty.
Create a routine maintenance schedule (clearing dust from ventilating fans, checking for water splatter and corrosion, replacing bulbs, etc.) this may be performed by the
user.
Connect lighting system to Hamilton 3-prong grounded Ground Fault Circuit Interrupter (GFCI) outlet (we recommend using the 5 outlet shock buster GFCI) and heavy
duty grounded timers, only. Do not use an ungrounded 2 prong timer.
In the event of a system malfunction, un-plug the system immediately, after unplugging the system call the manufacture and obtain a Return Authorization Number (RA#)
to return for repair
2
