8
AudioStar™ 5050ULTRA
Repeat and Program Operation
To Repeat One Track
on Music CD, MP3 or USB
1. During CD/MP3 disc or USB playback, press
SKIP FORWARD /SKIP BACKWARD
button to select a track you wish to repeat.
2. Press the PROG/MODE button until the
“REP” indicator shows on LCD display. The
unit will play the desired track repeatedly.
3. To cancel the setting, press the PROG/
MODE button continuously until the “REP”
“REP ALL” “RANDOM” “ALBUM” indicators
disappear.
To Repeat the Entire Disc or USB
1. During CD/MP3 disc or USB playback, press
the PROG/MODE button continuously until
the “REP ALL” indicator shows on the LCD
display. The unit will play all tracks on the
disc repeatedly.
2. To cancel the setting, press the PROG/
MODE button continuously until the “REP”
“REP ALL” “RANDOM” “ALBUM” indicators
disappear.
To Play Music CD or MP3 Disc
or USB Randomly
1. During CD/MP3 disc or USB playback, press
the PROG/MODE button continuously until
the “RANDOM” indicator shows on LCD
display. The unit will play all tracks randomly.
2. To cancel the setting, press the PROG/
MODE button continuously until the “REP”
“REP ALL” “RANDOM” “ALBUM” indicators
disappear.
To Repeat Album (Folder) for MP3
Disc or USB
1. During MP3 disc or USB playback, press the
PROG/MODE button continuously until the
“ALBUM” indicator shows display. The unit
will play all content on Disc or USB folder
(album) repeatedly.
2. To cancel the setting, press the PROG/
MODE button continuously until the “REP”
“REP ALL” “RANDOM” “ALBUM” indicators
disappear.
NOTE: Repeat album (folder) function
cannot support normal music CD.
This function is for MP3 disc format only.
To Program Specific Tracks
(CDs = 20 tracks, MP3 = 99 tracks)
1. Load the CD or USB you wish to program.
2. Make sure the CD or USB is in STOP mode.
3. Press the PROG/MODE button once; “P01”
will display on the LCD and “PROG” indicator
will blink.
4. Press the SKIP FORWARD /SKIP
BACKWARD button until the desired
track number is reached.
5. Press the PROG/MODE button to store the
selection.
6. Repeat the Steps 4 and 5 until you have
entered all the tracks.
7. To play the stored sequence, press the
PLAY/PAUSE button.
8. After all memory tracks have been played,
the CD player will stop automatically.
Note: When 20 tracks of CD (or 99 tracks for
MP3 disc or USB) have been programmed,
the memory is full and “FUL” will appear
on the display. If you want to cancel the
program memory, press the STOP button
once. “REP” “REP ALL” also applies to CD,
MP3 disc or USB program playback.
To Repeat Programmed Tracks
1. During program play, press PROG/MODE
button once will repeat the specifically
programmed track.
2. Press PROG/MODE button again to repeat
all of the programmed tracks.
3. Press STOP button to cancel repeat play on
programmed tracks.
