Hamilton Beach Stay or Go, Operation Manual, Page: 4 / 72

4
can result if moving blades accidentally become
exposed.
22.
I
f the jar should twist or rotate when the motor is
switched ON (
I
), switch OFF ( ) immediately and
tighten jar in collar or on blender base.
23.
D
o not leave blender unattended while it is
operating.
24.
B
efore plugging cord into wall socket, turn the
control to OFF ( ).
T
o disconnect cord, turn the
control to OFF ( ).
T
hen remove plug from wall
socket.
25.
D
o not use appliance for other than intended
purpose.
26.
D
o not place on or near a hot gas or electric
burner or in a heated oven.
27.
Y
our plug is provided with a fuse approved
by
ASTA
to
B.S.
1362.
I
f you need a
replacement fuse carrier, it must be replaced
with the same colour-coded carrier with the
same markings.
F
use covers and carriers can be
obtained from approved service agents.
28.
D
o not operate more than 3 minutes ON at
a time.
29.
CAUTION
:
I
n order to avoid a hazard due
to inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.