1. Place the steam generator on a stable and even surface.
2. Make sure there is water in the tank.
3. Plug in and switch on the iron at the mains power supply.
4. To increase the temperature of the iron, rotate the control dial in a clockwise direction
until the desired heat setting is reached.
5. Reduce the temperature by rotating the control dial in an anticlockwise direction.
6. Press the ON/OFF button to switch on the steam generator. The indicator light will
illuminate to signal that the iron has completed heating up (approx. 1 Minute.)
7. Press the carry lock release button to unlock the iron from the iron platform.
8. Press and hold the steam trigger to start ironing.
9. For best ironing results, after ironing with steam, perform the last strokes without the
steam.
6
hamiltonbeach.co.uk
USING YOUR APPLIANCE
PLEASE NOTE: When you use the appliance
for the first time it may take up to 45 seconds
for the steam to come out of the iron.
NOTE: The pump is activated each time you
press the steam trigger. It produces a subtle
rattling sound, which is normal. When there is
no water in the tank, the pump sound is
louder. Make sure to refill the water tank when
the water level drops below the minimum
level.
Use the steam boost function to remove stubborn creases.
10. Press the steam trigger twice quickly.
