3
Other Consumer Safety Information
If the cutting blade assembly locks and will not move, it will
damage the motor. Do not use. Call the toll-free customer service
number for information.
Do not place blending jar in the freezer filled with food or liquid.
This can result in damage to the cutting blade assembly, jar,
blender, and possibly result in personal injury.
BEFORE FIRST USE:
After unpacking blender, wash everything
except blender base in hot, soapy water. Dry thoroughly. Wipe
blender base with a damp cloth or sponge. DO NOT IMMERSE
BASE IN WATER. Care should be taken when handling cutting
blade assembly as it is very sharp.
13.
Do not use a broken, chipped, or cracked blending
jar.
14.
Do not use broken, cracked, or loose cutting blade
assembly.
15.
To reduce the risk of injury, never place cutting blade
assembly on base without blending jar or grinding
cup properly attached.
16.
Always operate blender with lid in place.
17.
Do not blend hot liquids in the travel jar or grinding
cup.
18.
When blending hot liquids in the 32-oz. (950-ml)
blending jar, remove center piece of two-piece
cover. Hot liquids may push lid off jar during
blending. To prevent possible burns: Do not fill
blending jar beyond the 3-cup (710-ml) level. With
the protection of an oven mitt or thick towel, place
one hand on top of lid. Keep exposed skin away
from lid. Start blending at lowest speed.
19.
Ensure collar on base of blending jar, travel jar, and
grinding cup are tight and secure. Injury can result if
moving blades accidentally become exposed.
20.
If the jar should twist or rotate when the motor is
switched ON (
I
), switch OFF (
O
) immediately and
tighten jar in collar or on blender base.
21.
Do not leave blender unattended while it is
operating.
22.
Before plugging cord into wall socket, turn the
control to OFF (
O
). To disconnect cord, turn the
control to OFF (
O
). Then remove plug from wall
socket.
23.
Do not use appliance for other than intended
purpose.
24.
Do not place on or near a hot gas or electric burner
or in a heated oven.
25. CAUTION:
In order to avoid a hazard due to
inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external
switching device, such as a timer, or connected to
a circuit that is regularly switched on and off by the
utility.
26.
Operating time cannot exceed 3 minutes for any
accessory or speed setting.
