Using the tea infuser
1. Remove the kettle lid, with the tea infuser attached, from your tea kettle.
2. Open the tea infuser lid by turning it until the arrow lines up with the “open”
mark.
3. Put the amount of tea you want into the infuser basket (we recommen one to
two teaspoons (5 - 10 g), then replace the lid by turning it until the arrow lines
up with “lock” mark.
4.
Fill your kettle with enough water for the tea you want, making sure that you do
not fill it past the maximum mark (“1.2 L TEA MAX”), then replace the lid, with
the tea infuser attached, onto your kettle.
5. Plug in your kettle and press the (power) button to turn it on.
6. Press any preset temperature button ( 160° F, 175° F, 195° F, or 212° F).
The temperature indicator light turns on and the water begins heating.
7. After the water temperature reaches the preset temperature, the power turns
off. Let the infuser basket remain in the kettle to steep the tea, and remove it
when the color of the tea indicates that the tea is ready (depending on your
personal preference).
Using the tea kettle memory function
If you decide that you want your tea kept warm, the Keep Warm button can
be pressed at any time during the heating process. With the Keep Warm
function selected, you can remove the tea kettle from the heating base for
up to three minutes and have the heating base remain on.
The temperature buttons can also be pressed at any time to select the
temperature to which you want the water heated.
Boil-dry protection
Should you accidentally allow the kettle to operate without water, the boil-dry
protection will automatically switch it off. If this should occur, allow the kettle
to cool before filling with cold water and re-boiling.
9
