Sync End Function (not suitable for Dehydrate function)
For cooking foods requiring different times and temperatures to be ready at the same time.
1. Press the
L or R icon first, and set the function, time and temperature.
2. Press the “
Sync End” icon and it will start flashing.
3. When in “
Sync End” mode, if one drawer is not programmed, that drawer will not be heated
until it has been programmed.
4. If you have programmed one drawer and not the other; the time and temperature default
settings will flash on the screen above the unused drawer until you press the corresponding
L or R icon.
5. Set a different time, temperature and function for the second basket, press start and the
appliance will start working, the drawer with the longer cooking time will start first.
6. The drawer with a shorter cooking time will show as “
HOLD”on the screen until it is time to
start cooking. E.g. With Fries cooking for 20 mins in the
L container and Cupcakes cooking for
8 mins in the
R container; the R container will show “HOLD” on the screen until there are 8
mins left for the Fries to finish cooking so both will be ready at the same time.
7. If you do not wish to set the second drawer the “
Sync End” should be cancelled by pressing
the “
POWER” icon.
L=R (Sync) mode
For cooking foods at the same time and temperature to be ready at the same time.
1. Press
L or R, and set time and temperature for one drawer, press the “L=R” icon, and the
appliance will duplicate the settings for the other drawer.
2. If you press the “
L=R” icon first, and then program the appliance, both drawers will
be set to the same settings.
3. Press the “
start/pause” icon to start both drawers cooking at the same time.
4. If you need to adjust the time and temperature whilst cooking, press “
start/pause” and press the
“
+” or “-“ icons and both drawers will be adjusted. Press “start/pause” to start cooking again.
Basket Out mode
1. When in the “
Sync end” or “L=R” modes, if you pull out one of the drawers, the appliance will
stop working and the screen for the drawer that has been pulled out will show “
Out” on the
screen.
2. If the drawer is reinserted within 90 seconds, the appliance will work as originally setup.
3. If the drawer is not reinserted within 5 mins, the drawer that has not been pulled out will
continue to work as originally set. The side without the drawer will not heat up and the
”
Sync end” and “L=R” icons will switch off.
4. If the drawer is inserted back into the appliance after 90 seconds but within 5 mins, both
drawers will keep working as originally set, but the
Sync end and L=R function will be inactive.
Fan Working
1. When the appliance is working the fan icon will always be illuminated.
2. When the appliance is not working, the fan icon will be off.
3. If the Fan icon is still flashing after the appliance has finished cooking, press the
POWER icon
or press the “
start/pause” icon to reset
.
8
