Hamilton Beach HBH755-CN, Operation Manual

Page: 6 / 100

6
Using the Controls
Hold
JUMP
P
button to run blender at high speed. Release to stop blender.
Information and Settings
SELECT
PROGRAM UNIT
SELECT OR SCROLL
Hold
SELECT
PROGRAM UNIT
SELECT OR SCROLL
to enter the menu and scroll up to INFORMATION option.
SELECT
INFORMATION
SELECT OR SCROLL
Press
SELECT
PROGRAM UNIT
SELECT OR SCROLL
to enter INFORMATION menu and scroll up to view below options.
For all options below, press
SELECT
PROGRAM UNIT
SELECT OR SCROLL
to view information or scroll for next option. Press
SELECT
PROGRAM UNIT
SELECT OR SCROLL
a second time during
any option to exit program menu.
SELECT
CYCLES INTO WARRANTY
CYCLES INTO WARRANTY.
SELECT
CUSTOM CYCLE COUNTER
CUSTOM CYCLE COUNTER. This cycle counter can be reset by the operator.
SELECT
CLEAR CYCLE COUNTER
CLEAR CYCLE COUNTER. This option will only clear custom cycle counter, not
cycles into warranty.
SELECT
CUSTOMER SERVICE
CUSTOMER SERVICE.
SELECT
DISPLAY BACKLIGHT
DISPLAY BACKLIGHT. Scroll to enable or disable option for constant display
of backlight.
SELECT
QUIET SHIELD SENSOR
QUIET SHIELD SENSOR. This can only be disabled for 120V.
SELECT
RUN COOL DOWN CYCLE
RUN COOL DOWN CYCLE. If the blender motor overheats, this message will
be displayed to prompt you to run a cool-down cycle. Remove the container
from the blender and press
SELECT
PROGRAM UNIT
SELECT OR SCROLL
. (For 230V, the Quiet Shield™ must be closed.)
SELECT
FACTORY DEFAULTS
FACTORY DEFAULTS. This option will restore all programs to factory defaults.
SELECT
SOFTWARE VERSION
SOFTWARE VERSION.
SELECT
EEPROM VERSION
EEPROM VERSION.