Hamilton Beach HBH755-CN, Operation Manual

Page: 5 / 100

5
Control Panel
SELECT
1 2 3 4 5 P
Cycle Buttons 1–5
Use preprogrammed cycles
or create custom programs.
Display
See the following pages for
status messages.
Scroll Buttons
Press the or button to scroll
through options in the display or to
adjust settings.
PULSE Button
Press and hold to
run the blender at
HIGH for short bursts.
SELECT Button
Hold to program
unit or review
diagnostic
information.
NOTE: Press any key to stop operation.
1. Read Important Safety Instructions and Warning
Symbol Explanations before use.
2. Place the blender on a dry, level surface.
3. Make sure the power switch is OFF ( O ). Plug the
blender into a grounded 3-prong electrical outlet.
4. Place the container on the base with ingredients
and container lid in place.
5. Turn the blender on by pressing the Power Switch
marked Reset [ON ( I )] / OFF ( O ). The red LED
switch indicates that power is ON ( I ).
6. Select the desired function.
7. Use any button to stop operation.
Blender Operation – Quick Start Guide
Using the Controls
SELECT
1 2 3 4 5 P
These preset program buttons each have a blending cycle designed for commonly made drinks (see
separate drop-in). Each button can be changed to a different preprogrammed cycle using the directions
below.
Changing Programs
SELECT
PROGRAM UNIT
SELECT OR SCROLL
Hold
SELECT
PROGRAM UNIT
SELECT OR SCROLL
to program unit. Press
SELECT
PROGRAM UNIT
SELECT OR SCROLL
to continue.
SELECT
PROGRAM 1–8
SCROLL OR HOLD 1–5
There are 8 preset programs. Scroll up to view the program. Hold button 1–5 to
assign a program or continue to scroll up for the following additional programs.
SELECT
HIGH SPEED
Y-SELECT OR SCROLL
SELECT
LOW SPEED
Y-SELECT OR SCROLL
SELECT
JUMP SPEED
Y-SELECT OR SCROLL
Press
SELECT
PROGRAM UNIT
SELECT OR SCROLL
and scroll up to select cycle time. Hold button 1–5 to assign a program.
NOTE: Saving a new cycle to a location will overwrite any existing cycle in that location.