IMPORTANT SAFEGUARDS
Before the refrigerator
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the
including the following:
•
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord
•
Replace all panels before operating
•
It is recommended that a separate circuit, serving only your
that cannot be turned off by a switch or pull chain
•
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.
And do not store or use gasoline or other flammable vapors and liquids in the vicinity o
other appliance. The fumes can create a fire hazard or explosion.
•
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
disconnected.
•
Do not connect or disconnect the electric plug when your h
•
Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can result
in electrical shock or death.
•
Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in
this material. All other servicing should be referred to a qualified technician.
•
Use two or more people to move and install the appliance. Failure to do so can result in back or other
injury.
•
To ensure proper ventilation for your appliance, the unit must be completely unobstructed. Choose a
well-ventilated area with temperatures above 55
installed in an area protected from the elements, such
•
The appliance should not be located next to ovens, grills or other sources of high heat.
•
The appliance must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
•
Do not kink or pinch the power supply cord of the appliance.
•
The fuse (or circuit breaker) size should be 15 amperes.
•
It is important for the appliance to be leveled in order to work properly. You may need to make several
adjustments to level it.
•
All installation must be in accordance with local plumbing code requirements.
•
Make certain that the pipes are not pinched or kinked or damaged during installation.
•
Check for leaks after connection.
•
Never allow children to operate, play with or crawl inside the appliance
•
Do not use solvent-based cleaning agents or abrasives on the interior.
discolor the interior.
•
Do not use this apparatus for other than its intended purpose.
3
IMPORTANT SAFEGUARDS
refrigerator is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the refrigerator, follow basic precautions,
including the following:
prong outlet, do not remove grounding prong, do not use an adapter, and do
•
It is recommended that a separate circuit, serving only your refrigerator, be provided. Use
that cannot be turned off by a switch or pull chain
•
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.
And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance. The fumes can create a fire hazard or explosion.
•
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
•
Do not connect or disconnect the electric plug when your hands are wet
•
Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can result
•
Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in
is material. All other servicing should be referred to a qualified technician.
•
Use two or more people to move and install the appliance. Failure to do so can result in back or other
•
To ensure proper ventilation for your appliance, the unit must be completely unobstructed. Choose a
ventilated area with temperatures above 55
0
F (13
0
C) and below 90
0
F (32
0
C). This unit must be
installed in an area protected from the elements, such as wind, rain, water spray or sunlight.
•
The appliance should not be located next to ovens, grills or other sources of high heat.
•
The appliance must be installed with all electrical, water and drain connections in accordance with
A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
•
Do not kink or pinch the power supply cord of the appliance.
) size should be 15 amperes.
•
It is important for the appliance to be leveled in order to work properly. You may need to make several
•
All installation must be in accordance with local plumbing code requirements.
hat the pipes are not pinched or kinked or damaged during installation.
•
Never allow children to operate, play with or crawl inside the appliance
based cleaning agents or abrasives on the interior. These cleaners may damage or
•
Do not use this apparatus for other than its intended purpose.
is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
, follow basic precautions,
prong outlet, do not remove grounding prong, do not use an adapter, and do
, be provided. Use receptacles
•
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.
f this or any
•
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
•
Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can result
•
Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in
•
Use two or more people to move and install the appliance. Failure to do so can result in back or other
•
To ensure proper ventilation for your appliance, the unit must be completely unobstructed. Choose a
C). This unit must be
as wind, rain, water spray or sunlight.
•
The appliance must be installed with all electrical, water and drain connections in accordance with
A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
•
It is important for the appliance to be leveled in order to work properly. You may need to make several
These cleaners may damage or
