4
3. HOW TO ASSEMBLE
a. Handle Assembly
The vacuum cleaner comes packed with the handle in the folded position. To raise
the handle to the working position, lift the handle all the way up until the locking
mechanism clicks. (fig. 3/1).
The handle will lock into position. If the handle does not lock automatically, rotate the
locking knob clockwise to lock.
To lower the handle, rotate the locking knob counterclockwise until it unlocks and
lower the handle all the way down.
b. Tool Holder Assembly
Tool required: Phillips screwdriver.
The air powered pet tool holder attaches to the front of the handle. Remove the
screw with a Phillips screwdriver. Place the holder over the location and screw the
holder into position using the screw that was just removed.
4. HOW TO OPERATE
a. Cord Release
Turn the upper cord release for easy cord removal (fig. 4/1).
Use the handy cord clip located on the back of the handle.
This will allow you to secure any excess cord and reduce
any risk while operating the appliance.
fig. 3/1
fig. 4/1
