16
9. Replace all seven (7) screws to secure the base plate. (fig. 8/1)
7. GENERAL MAINTENANCE
WARNING! Moving parts can pinch and crush. Unplug vacuum before servicing.
a) Debris Removal from the Base Plate
Check to see if the dirt container is full. empty if needed.
Plug the vacuum in and check to see if there is any suction at the end of the hose.
1. Unwrap the hose from the caddy. Twist and unlock to remove clogs. Clean out the
hose with a broom handle. Check the access door on the back of the vacuum cleaner
(near the hose end).
2. Remove all seven (7) screws, (fig. 8/1), and check for any obstruction in the base
plate area of the underside of the vacuum. (fig. 8/2) Refer to
Belt and Brushbar
Removal and Replacement.
3. Remove the dirt container (refer to
Dirt Container and Filter Removal
and
Replacement
) and check the dirt container inlet located just behind the container.
The inlet has a black rubber seal around the opening.
TABS
TABS
fig 8/1
fig 8/2
