15
5. To replace the belt, slide the belt onto the motor shaft. (fig. 6/4)
6. Place new belt in area of brushbar without bristles. (fig. 6/5)
7. With the new belt in place, pull and slide the brushbar into the underside opening,
making sure that the brushbar end caps are in the correct orientation. (fig. 6/6) Rotate
the brushbar manually to make sure the belt is properly aligned.
8. Replace the base plate onto the bottom of the cleaner. (fig. 6/7)
TABS
TABS
TABS
TABS
fig 6/4
fig 6/5
fig 6/6
fig 6/7
