7
6
Digital Clock Timer
To Set Clock:
1.
Plug in coffeemaker. Numbers on clock will flash until you
set time of day.
2.
To set time of day, press
H
(hour) button to set current hour.
AM or PM will be displayed.
3.
Press
M
(minute) button until
you reach the current time.
Features
Pause ’N Serve
This feature allows you to pour a cup of coffee before the
entire brew cycle has completed. By removing the carafe,
the flow of coffee will temporarily stop. The flow of coffee
will resume when carafe is returned to the Keep-Hot Plate.
Do not remove carafe more than 20 seconds or brew
basket may overflow.
Brew Strength Selector
This feature allows you to control the strength/flavor of the
coffee. To select from mild to strong flavor, rotate the Brew
Strength Selector Knob, located on top of the coffeemaker,
to desired strength.
Automatic Shutoff
The Automatic Shutoff feature shuts off the Keep-Hot Plate
two hours after brew cycle begins. Always turn coffeemaker
OFF and unplug when finished.
To Set and Use Automatic Brew:
1.
Make sure clock is set for correct time of day.
2.
Fill coffeemaker with desired amount of water and coffee.
Place carafe with lid on Keep-Hot Plate. Close lid.
3.
While holding
PROG
(program) button, press
H
and
M
buttons until desired brewing time is reached.
4.
Once desired brewing time has been reached, release
PROG
and current time is displayed.
5.
Press
AUTO
to set coffeemaker to come on automatically
at the desired time.
6.
An illuminated green light on the
AUTO
button indicates
that the brew cycle will begin at the set time.
7.
Press
AUTO
again to cancel automatic brew.
Burn Hazard
Return carafe to Keep-Hot-Plate within 20 seconds. Hot
water continues to flow into the filter basket when this
feature is used. Overflowing coffee and hot water are a
burn hazard.
CAUTION
840145400 ENv02.qxd 12/21/05 3:40 PM Page 6
