5
4. Insert Housing with Pin
straight into Accessory
Opening, aligning Tab on
Housing with Tab Opening
near Accessory Knob.
Turn Accessory Knob
clockwise to tighten and
hold Accessory in place.
5. While holding Cone at
opening end, insert Cone
straight into Housing.
Carefully, turn Cone
clockwise to secure
in place.
6. Plug Stand Mixer into outlet.
7. Cut food to fit into Food
Chute and place a large bowl
under Housing.
8. Add food to Food Chute and
use Food Pusher to push
food into Slicer/Shredder.
Select speeds 1-3 on Stand
Mixer.
9. When finished shredding
or slicing, turn Stand Mixer
Speed Control Dial to OFF
( ) and unplug.
How to Attach Slicer/Shredder Accessory (cont.)
How to Disassemble:
1. Before removing Housing, make sure Stand Mixer is unplugged and Stand Mixer Speed Control Dial is set to OFF ( ).
2. Carefully turn Cone counterclockwise to remove. While holding Housing, unscrew Accessory Knob counterclockwise, then turn
Housing counterclockwise to remove.
w
CAUTION
Cut Hazard. Unplug
before inserting or removing parts.
Keep fingers out of feed opening.
Always use food pusher.
840336500 v16.indd 5
4/14/20 12:10 PM
