9
NOTICE:
To prevent damage to the water dispenser, the plastic storage parts are not to be
washed in the dishwasher.
Draining Instruction:
The dispenser should be drained before cleaning the tanks and before leaving for long vacations or
absences.
1)
Set both power switches (on the back of the dispenser) to the
OFF
position and unplug
the dispenser.
2)
Dispense water from both buttons into container(s) until no more water can be
dispensed (about 1 quart of water still remains in the dispenser). Put a container that
will withstand hot water under the hot water faucet.
3)
Remove the water bottle from the dispenser.
4)
Place a large bucket beneath the drain outlet on the rear of the dispenser.
5)
WARNING: BURN HAZARD. The dispenser heats water to a temperature of
approximately 190
° F (88
°
C). Water temperatures above 125
°
F (52
°
C) can
cause severe burns or death from scalding. Children, the disabled and the elderly
are at highest risk of being scalded. Children should be supervised by an adult
when using this product.
6) After
draining,
replace the silicon stopper and cap.
7)
Make sure to install a full bottle and dispense water from both water faucets before
plugging in and turning on the dispenser (see Preparing, Loading and Operating Your
Dispenser).
Cleaning the Drip Tray and Grill:
