8
Troubleshooting
Blender fails to start.
•
Power Button was not pressed and program not selected.
•
Check to see if unit is securely plugged into an electrical outlet of
proper voltage and frequency.
•
Check to see if fuse for electrical outlet has blown or if a circuit
breaker has tripped.
Ingredients will not mix properly.
•
Add ingredients in the order listed on Personal Blending Jar.
•
Check to see if enough liquid has been added to ingredients.
Mixture should be fluid and free-running at all times.
•
Solid pieces are too large.
•
Blending Jar is too full. Do not fill past MAX (20 oz.) line.
•
Cutting Blade Assembly blades are not sharp or are damaged.
Inspect Blending Jar and Cutting Blade Assembly before each use.
Blender smells like it is burning.
•
Turn off Blender and allow unit to cool.
•
Although motors are tested during the manufacturing process,
heavy use may cause curing of motor windings. The smell may
quickly dissipate after a few heavy uses.
•
If smell continues after additional heavy uses, call the provided
Customer Service number.
There is grease around bottom of Blending Jar.
•
Monitor problem and source. This may indicate an issue with jar
bearings.
•
Call the provided Customer Service number if condition persists.
For Model 53625 only:
Power Button is flashing and Blender will not start.
•
Either wait 30 seconds and press Power Button again, or unplug
and plug back in. Press Power Button to try again.
•
Remove Personal Blending Jar. Press Power Button to turn on.
Press BLEND to run in place for 30 seconds to 1 minute, and
resume blending.
•
Remove Personal Blending Jar and shake. Place Jar back on Base
and resume blending.
Summary of Contents for 53620
Page 10: ...10 Notes ...
Page 26: ...26 Notas ...