7
The Quick Clean function should only
be used to rinse the blender between
batches of processing the same food.
When the processing of a single type of
food is finished, the blender should be
disassembled and thoroughly cleaned
as instructed in “How to Clean.”
To Quick Clean, pour 2 cups (500 ml)
warm water in jar and add 1 drop liquid
dishwashing detergent. Run the blender
on QUICK CLEAN for 10 seconds.
Discard soapy water. Rinse with clean
water.
This function is not a substitute for
regular cleaning as instructed in “How
to Clean.” This function should never
be used when blending any mixture
containing eggs, milk, or any other
dairy products, meats, or seafood.
Quick Clean
Troubleshooting
POTENTIAL PROBLEM
Blender leaks.
Ice not crushed.
Does not blend well.
PROBABLE CAUSE/SOLUTION
• Tighten jar nut or Sure Rest jar base tighter on
jar.
• Make sure gasket is in place for models with
cutting assembly.
• See ice crushing instructions in “Blending
Specific Foods” section.
•
Make sure enough liquid has been added. A
minimum of 8 ounces (250 ml) is recommended.
840157000 ENv03.qxd 1/3/07 11:48 AM Page 7
