8
Keep Warm
This unit is equipped with an adjustable keep warm temperature
and adjustable auto-off feature. It defaults to highest (warmest)
temperature setting and 2-hour auto shutoff.
1. Adjust keep warm temperature by pressing WARM TEMP or until
your desired temperature setting is displayed; then release.
2. Adjust keep warm shutoff time by pressing WARM TIME until
desired time is displayed. Shutoff time can be set in 10-minute
intervals up to 4 hours.
NOTES:
• To see “auto off” time, press WARM TIME. Display will go back to
clock time within 5 seconds.
• “Auto off” time can be checked whenever Coffee Maker is plugged
in. This includes any time during programmed brew, brewing, keep
warm, and standby mode.
Care and Cleaning
w
WARNING
Electrical Shock Hazard. Do not immerse cord, plug,
or coffee maker in any liquid.
To remove mineral deposits and buildup: All coffee makers should
be cleaned at least once a month; once a week for areas with hard
water.
1. Unplug. This resets Coffee Maker for cleaning or water filter
notification.
2. Wipe Coffee Maker with a damp cloth or sponge. Dry.
3. Remove Water Filter and Pod, see “How to Replace Water Filter.”
4. Pour a minimum of 1 pint (2 cups [473 mL]) white vinegar into
Water Reservoir.
5. Plug in. Press BREW STRENGTH button repeatedly and select
“Clean”. “Clean” will flash in the display. Press BREW l/ button
once to start. When clean cycle is finished, wait for unit to cool.
Clean cycle takes about 35 minutes to complete.
6. Empty Carafe and rinse. Press BREW STRENGTH and select
“Classic”. Run 2–3 more brew cycles with clean water only. Allow
to cool between cycles.
7. Carafe with Lid, Removable Water Reservoir with Handle,
Removable Water Reservoir Lid, Filter Basket with Handle, and
Measuring Scoop are dishwasher-safe. DO NOT use “SANI”
setting on dishwasher. “SANI” cycle temperatures could damage
your product.
NOTES:
• Clean Notification: If unit is always plugged in, after 30 cycles,
“Clean” will illuminate in display. Follow directions in “Care and
Cleaning” above.
• Performing cleaning procedure will clear display. Display will clear
automatically after two brews.
• Brew cycle counter resets every time Coffee Maker is unplugged
or when power is lost.
Programming
(cont.)
