4
5
How to Assemble and Use
IMPORTANT:
Your Hamilton Beach air purifier is designed for
easy use and maintenance. Make sure HEPA filter, and carbon
pre-filter are properly installed before use.
Selecting the Proper Location
To prevent the risk of personal injury or damage to the air
purifier and provide the best possible performance of your air
purifier, follow the placement guidelines below:
DO:
• Place the air purifier on a flat, stable
surface.
• Place the air purifier near an electrical
outlet where it is out of the way. Make
sure that the air purifier and the cord
do not present tripping hazards.
• Select a central location with adequate
air circulation.
• Turn off and unplug the air purifier before moving or
servicing it, or if it will not be used for several days.
• Route the electrical cord clear of furniture to prevent
damage from pinching.
DO NOT:
• Do not stand, sit, or place any objects
on the air purifier. It is not designed to
support additional weight.
• Do not block the air intake and outlet
grilles with drapes, curtains, or blinds.
This may cause reduced performance.
• Do not use in a kitchen, garage, or
area with grease, oil or chemicals
such as solvents or insecticides.
• Do not place on or near heat sources such as stoves,
radiators, or heaters, or in direct sunlight.
• To reduce electrical noise and interference, do not place on
or near, or plug into the same outlet as TVs, baby monitors,
or cordless phones.
Purifier
Room Size*
Carbon
HEPA
Model
(sq. ft.)
Pre-Filter
Filter
04150
175 ft
2
04922
04912
04152
300 ft
2
04923
04913
* Each air purifier is designed to filter the room five times
per hour at high speed. Factors such as room shape and
ceiling height can affect this rate. It is normal that the air
flow will be reduced as the filters become clogged. See
“Checking the Filters” on page 9 for more information.
To Order Replacement Parts
Replacement parts may be available where the air purifier was
purchased or can be obtained directly from Hamilton Beach.
About Your Air Purifier
The air purifier functions as an air cleaner by helping to
remove particulates and airborne bacteria from the air.
The air is cleaned in 2 stages:
1.
A fan draws air through the intake grille on the front of the
air purifier. Then it passes through the carbon pre-filter
which traps large dust particles and reduces odors.
2.
The white HEPA filter then removes particles as small as
0.3 microns from the air at 99.97% effectiveness.
Before First Use
Be sure to remove all packing materials. The pre-filter is
packed in a plastic bag inside the air purifier for shipping.
840115800 ENv00.qxd 6/6/03 9:02 AM Page 4
