Hamilton Beach Professional B79, Operation Manual

Page: 4 / 84

4
top of the lid, keep exposed
skin away from the lid, and
start blending at lowest speed.
21.
E
nsure cutter assembly is
tight and secure to jar. Injury
can result if moving blades
accidentally become exposed.
22.
D
o not leave blender
unattended while it is
operating.
23.
C
heck that the appliance
is OFF ( ) before plugging
cord into wall socket.
T
o
disconnect, turn the control
to OFF ( ); then remove plug
from wall socket.
T
o unplug,
grasp the plug and pull from
the socket.
N
ever pull from
the power cord.
24.
D
o not use appliance for
other than intended purpose.
25.
B
e careful if hot liquid is
poured into the blender
container as it can be ejected
out of the appliance due to
sudden steaming.
26.
CAUTION! I
n order
to avoid a hazard due to
inadvertent resetting of the
thermal cut-off, this appliance
must not be supplied through
an external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the
utility.
27.
T
he plug is provided with a
13-amp fuse approved by
ASTA
to
B.S.
1362.
I
f
you need a replacement fuse
carrier, it must be replaced
with the same colour-
coded carrier with the same
markings.
F
use covers and
carriers can be obtained from
approved service agents.
28.
I
n manual model do not
exceed normal operating cycle
of 2 minutes ON (
I
) and 1
minute OFF ( ).
I
n SMOOTHIE
( )
or
ICE CRUSH
( )
mode allow
appliance to cool for 2 minutes
between each cycle.
I
n HOT SOUP
( )
mode
allow appliance to cool for 10
minutes between each cycle.
SAVE THESE INSTRUCTIONS