Universal Keying Adapter 3
05/05/2013
Page 6 of 10
The cabinet end panels are installed using two flat head screws on each end. If you find
that the connectors don’t line up with the holes, you may have the board in the wrong slot
OR you may have the end panels upside down.
Carefully peel the backing from the supplied label. Carefully line it up with the
connectors, and align it with the lower edge parallel to the edge of the cabinet end cap.
Attach the label to the cabinet, wrapping the ends around the sides of the cabinet. You
can use a sharp blade such as a razor or an X-Acto knife to trim the ends of the label even
with the top groove on the side of the cabinet for the best appearance.
