26
scan the router’s SSID. If you select “Isolated”, you can prevent this network from
communicating with other networks.
Broadcast network Name
: You can select “Disable” to forbid the router to
broadcast SSID. After that, the wireless clients cannot scan the router’s SSID. The
clients cannot communicate with the router if they fail to know the router’s SSID.
The broadcast network identifier is defaulted as “Enable”.
AP Isolation
: Isolated at the AP level. After it is enabled, clients at the AP
level cannot visit each other, which could prevent the virus from spreading.
MBSSID AP Isolation
: Isolated from areas outside this AP. Other clients not
belonging to this AP shall not visit clients under this AP.
Basic service set identifier: Business group identifier of the wireless network.
In terms of IEEE 802.11, the BSSID is the MAC address of the wireless AP.
Frequency (channel)
: Channels currently used by the router. Other effective
work channels could be selected from the following list and options are 1 to 14.
Operation Mode:
Mix mode
: Under this mode, previous wireless network cards are identifiable
and connectable to Pre-N AP, but the throughput will be affected to some degree.
Green Field
: Be able to reach high throughputs. But it affects the backward
compatibility and the system’s safety.
Channel bandwidth
: Please select “Default Settings”. It is divided into two
types, namely 20MHz and 20/40MHz.
Protection interval
: Defaults as “Automatic”. An appropriate protection
Summary of Contents for HM-434
Page 1: ...1 Super 3G Router HM 434 Instruction Manual V1 0 0 ...
Page 39: ...39 ...
