5
9.
Notice (
Ⅰ
)
:
Test procedure of S-200 and notice:
S.O.P:
Turn off HUD power and switch to (off).
9-1. Do cars be applicable to the detection of S-200:
9-1-1.Turn off the car power first
→
Plug OBD2
→
Connect the cable to the S-200 host
→
switch
HUD power key to (ON)
→
Turn on the car power.
9-1-2.Not bright
→
It can’t be installed on your car.(Refer about OTHERS:9-3)
9-1-3.Bright
→
and have power
→
but no RPM to display
→
it can’t be installed on your car.
9-1-4.Bright
→
and have power
→
show RPM and like display to launch the RPM
→
show voltage
→
normal and ok for your car.
9-2.Check that an automatic shutdown?
(Automatic power-off, automatic activation of HUD main upon ignition; and automatic power-off
of HUD main upon shut-down of the vehicle)
9-2-1.Cut off car power
→
automatic power-off of HUD
→
normal
9-2-2.Cut off car power
→
no automatic power-off of HUD
→
go into Parameter 1
→
and adjust 1 to 2
or 3
→
automatic power-off of HUD
→
normal and ok
(90% cars can be match with this item(2 or 3), if setting 1 can’t be power-off automatically)
9-2-3.Above steps still can’t shut down, please contact us.
9-3.Other Problems and issues on the S-200:
9-3-1.Because some top cars (as BMW or Lexus…)have electronic equipments such as keyless
which likely to interfere with the S-200 and you maybe encounter situations such as :
→
Keyless device may cause the machine not to respond, and it maybe have opportunities for bright
but turn off the machine and it still will be bright
→
(M3 car type)
→
returning policy.
9-3-2.TDCI diesel cars: The voltage value will bounce , some cars can’t be match with our OBD
HUD. [Because diesel output agreement is different from OBD II public agreement]
9-3-3.Currently testing cars - the majority have their own external function devices such as touch
the door or others or keyless, there will be conflict with our OBD II HUD.
9-3-4.S The HUD is kept standby when the engine is turned off, and there is still a little bit
consumption of current (the common character of all OBD products); turn off the HUD main power
or remove it if your car is not to be used for a longer period (e.g. a week or longer).