5
Änderungen vorbehalten
F i t t i n g I n s t r u c t i o n
5. Interface Fitting Instruction
Safety!
The following procedures must only be carried out on condi-
tion that the mains (line) power cable is not connected to the
oscilloscope and no connection is made at the measurement
inputs.
STOP
Attention!
To avoid damage of the interface during removing
and fi tting by electrostatic discharge, please touch
a metal part of the oscilloscope for potential equa-
lisation between oscilloscope and your body. Abide
this connection during the fi tting/removing!
Only handle the interface by its IEEE-488 socket!
!
5.1 Removing of the actually inserted interface.
5.1.1
Remove both fastening screws
5.1.2
Pull out the interface.
5.2 Fitting the interface HO740
5.2.1
Insert the interface HO740
in the opening in such a way, that
the PCB will be inserted in the
guidance - visible on both sides – and push it in completely.
5.2.2
Fit the interface with the previously (item 5.1.1) removed
fastening screws.
