www.hameco.eu
HV-55 User Manual
hameco
23
7.2 Use remote control
After the camerastarts normaly, it receives an infrared command and executes. Press down remote
control key, receiving indicator of remote control flashes, release the key, the indicator stops flashing.
User can set preset, read position, horizontal and vertical motion by infrared remote control.
Description of keys:
1. Key press mentioned in this manual means press and release the key on remote control. For example,
“press [HOME] key” means press down [HOME] key and release. If a long hold press is needed, it will
be specified.
2. Operation of combination keys mentioned in this manual means operating such keys in order.
For example, “press [*] + [#] + [F1]” means press [*] first, then [#], and [F1] at last.
1) Select camera
Select address number of camera to be controlled.
2) Control holder
Rotate upward: Press [ ] ; rotate downward: Press [ ]
Rotate to left: Press [ ] ; rotate to right: Press [ ]
Center position: Press [HOME]
Press the UDLR key for a longer time, it will rotate from
low speed to high speed continuously, until it reaches
the destination; release in the middle of the journey,
and it will stop movement.
3) Set, cancel, call preset
1. Save preset: Press [Set preset], then press any number
key from 0 to 9, it will reset a preset corresponding to the
number key.
Note: with remote control, it can set 10 presets at most.
2. Call preset: Press number key 0~9 directly, it will call
preset which has been saved.
Note: If this key has no preset, this operation is invalid.
3. Cancel preset: Press [cancel preset], then press any
number from 0 to 9, it will cancel preset corresponding to
the number.
Note: Press [#] three times in a row, it will cancel all presets.
4) Zoom control
Zoom in: Press [zoom +]
Zoom out: Press [zoom -]
Pressing these keys continuously will enable continuous zoom
in/zoom out; releasing midway will stop the zoom.
