www.hameco.eu
HV-55 User Manual
hameco
19
When upgrading, note whether camera to be upgraded is the close-up camera or panorama camera,
then
click Select file -> upgrade, the following interface appears:
After upgrading is completed, the camera will perform self-inspection.
Note:
After grading, you can restore factory settings by combination key [*] [#] [6] on remote control
or by remote control menu.
6, DESCRIPTION OF RECORDING AND BROADCASTING
HOST
6.1 Auto tracking control
The recording and broadcasting host sends command by LAN network port or concentrator RS232
serial port and controls the automatic tracking motion of teacher tracking camera. In auto tracking
mode, it does not allow control camera holder rotation or zoom by IVESmart configuration tool or re
-
mote control; in stop auto tracking mode, it allows control camera holder rotation or zoom by IVESmart
configuration tool or remote control.
1. Network receiving address
Address for teacher tracking camera to receive command can be searched in IVESmart configuration
tool, click Setting -> IP address -> search successively, as follows:
